IMO marine mattress with MED certificates

IMO marine mattress

INQUIRY

IMO marine mattress with MED certificates

Ship mattress with IMO MED certificate

Spring Mattress with MED certificate
Mattress is composed of:
1.Cover material: 0.65 mm thick, flame-retardant treated, full-polyester fabric, surface density 394 g/m²
2.Sponge: 9 mm thick, made of polyurethane, density 30(±5%) kg/m³
3.Non-woven fabric: 0.7 mm – 0.8 mm thick, made of polypropylene, surface density 20 g/m²
4.Thermal blanket: 0.4 mm thick, flame-retardant treated, made of polyester, surface density 400 g/m²
5.Coil spring inner core: 165 mm in height
6.Thermal blanket: 0.4 mm thick, flame-retardant treated, made of polyester, surface density 400 g/m²
7.Non-woven fabric: 0.7 mm – 0.8 mm thick, made of polypropylene, surface density 20 g/m²
8.Sponge: 9 mm thick, made of polyurethane, density 30(±5%) kg/m³
9.Cover material: 0.65 mm thick, flame-retardant treated, full-polyester fabric, surface density 394 g/m²

Sponge Mattress with MED certificate
Mattress is composed of:
1.Cover material: 0.65 mm thick, flame-retardant treated, full-polyester fabric, surface density 534 g/m²
2.Sponge: 9 mm thick, made of polyurethane, density 30(±5%) kg/m³
3.Non-woven fabric: 0.7 mm – 0.8 mm thick, made of polypropylene, surface density 20 g/m²
4.Sponge: 180 mm thick, made of polyurethane, density 30(±5%) kg/m³
5.Non-woven fabric: 0.7 mm – 0.8 mm thick, made of polypropylene, surface density 20 g/m²
6.Sponge: 9 mm thick, made of polyurethane, density 30(±5%) kg/m³
7.Cover material: 0.65 mm thick, flame-retardant treated, full-polyester fabric, surface density 394 g/m²

Application/Limitation
Approved for use throughout the accommodation as not readily ignitable bedding component.

Any thin light mattress or removable cover used in conjunction with the approved product is to be approved according to the Marine Equipment Directive.
Each product is to be supplied with its manual for use and maintenance

Type Examination documentation
Test report no. FT17299 dated 13th of December 2017, issued by Far East Fire Testing Centre (FEFTC), Shanghai, China.
Product drawing no. JBS-PD2017-01 Rev. 1.0 – Product structure diagram from the manufacturer.
Tests carried out
Tested according to IMO Resolution MSC.307(88) – 2010 FTP Code Annex 1, Part 9.
Marking of product
The product or packing is to be marked with name and address of manufacturer, type designation, fire technical rating, the MED Mark of Conformity and USCG approval.

Company Introduction:

1.the spring is made by our factory,the spring coils can be under control